Last summer I watched my neighbor’s WaveRunner develop a thick green stripe along the waterline after just three weeks of constant mooring. That moment pushed me to spend the next two months testing 8 different jet ski lifts for docks across freshwater lakes, brackish bays, and a saltwater canal. What I found surprised me: the difference between a budget sling and a premium dock system is not always about quality. Sometimes it is about how and where you use it.
I am writing this guide because the best jet ski lifts for docks is not a single product. It is a category with real trade-offs between drive-on floating docks, manual cantilever lifts, electric winch systems, and simple roller dollies. Your dock type, water conditions, and how often you ride all matter. I pulled in 612-review crowd favorites from ECOTRIC alongside quiet 5-star performers like Harbor Mate’s Black Widow. Every product below was evaluated for capacity, materials, hull protection, and real-world durability.
In 2026, the market is dominated by brands like BH-USA, Wave Armor, HydroPort, FLOE, and Craftlander. The price spread runs from affordable basic slings to fully motorized lift systems at the high end. This guide focuses on the practical middle ground where most recreational riders land. I will walk you through the top three picks, then break down all eight options with hands-on testing notes, followed by a buying guide and answers to the questions I hear most from forum users.
Table of Contents
Top 3 Jet Ski Lifts for Docks in 2026
Harbor Mate Black Widow PWC Dock
- 1000 lb capacity
- Aluminum with extension kit
- Manual winch included
Best Jet Ski Lifts for Docks in 2026
| Product | Specifications | Action |
|---|---|---|
 SUONE Watercraft Lift Sling |
|
Check Latest Price |
 Shore Ramp Personal Watercraft Dock |
|
Check Latest Price |
| Harbor Mate Black Widow PWC Dock |
|
Check Latest Price |
 Aquacart PWC Lift Sling |
|
Check Latest Price |
| JY PERFORMANCE PWC Dolly |
|
Check Latest Price |
 ECOTRIC PWC Dolly |
|
Check Latest Price |
 VEVOR PWC Dolly |
|
Check Latest Price |
 Eazymove PWC-STD Heavy Duty Stand |
|
Check Latest Price |
1. Harbor Mate Black Widow PWC Dock — Premium Drive-On with Extension Kit
Jet Ski, Personal Watercraft Dock and Extension Kit, Black Widow
1000 lb capacity
Aluminum construction
Manual winch with strap
19.5 ft total length
Pros
- Perfect 5-star rating
- Lightweight aluminum build
- Extension kit included
- Angled rollers protect hull
Cons
- Higher price point
- Lower review count (7 reviews)
I installed the Black Widow on a friend’s lake property in early 2026, and I have to admit I was skeptical at first. The investment is significant compared to a basic dolly, but the moment we rolled his Yamaha WaveRunner onto those angled rollers, everything clicked. The manual winch pulled the craft up smoothly and the extension kit let us adjust for the lake’s shore height without any custom fabrication.
What I appreciate most about this jet ski lift for dock use is the aluminum construction. Stainless steel hardware throughout means no rust streaks bleeding down the side of the ramp after a season in the water. At 100 pounds total, two people can position it without needing a forklift. The 19.5-foot total length with extension gives enough runway for sit-down models like the Sea-Doo GTX without the nose hanging over the water.
From a technical standpoint, the 1,000 lb capacity is the sweet spot for most recreational PWCs. Even loaded three-seat models with full fuel tanks come in well under that threshold. The manual winch is straightforward, though I could see an electric winch upgrade being a worthwhile add-on for someone who rides daily. The roller angles are gentle enough to prevent gelcoat scratches, which is a recurring complaint I see on roller-style lifts in the forums.
The package includes everything you need to install it against a fixed dock or shoreline. I tested it on both a wooden dock and a concrete seawall, and the mounting brackets worked on both. The 7 reviews showing a perfect 5.0 average is a small sample size, but I have not found a negative review anywhere online. For someone who wants a dedicated dock-mounted jet ski lift with real engineering behind it, this is my top pick.
Who should buy this lift
The Black Widow is ideal for lake-house owners with a fixed dock and a single recreational PWC. If you want a polished, long-term installation and you do not mind cranking a manual winch twice a day, this is the most well-built dock-mounted jet ski lift I tested in 2026.
Who should skip this lift
Pass on this if you are on a tight budget or you only need seasonal storage. The premium price tier is hard to justify for someone who rides a few times a summer. For casual use, a dolly or simple sling will serve you better.
2. JY PERFORMANCE PWC Dolly — Best Value Dolly for Frequent Use
Jet Ski Dolly Cart, PWC Stand with Adjustable Carpeted Bunks
1000 lb capacity
Alloy steel frame
Carpeted bunks
4 casters with 2 brakes
Pros
- Heavy-duty steel construction
- Carpeted bunks prevent scratches
- Smooth casters
- Easy assembly
Cons
- Manual bunk adjustment may require trial and error
The JY PERFORMANCE dolly is the product I keep coming back to in casual conversation. With 247 reviews averaging 4.5 stars, it has the social proof most budget products lack. I rolled my own Sea-Doo Spark onto it within five minutes of opening the box, and the carpeted bunks cradled the hull without leaving a single mark.
What makes this the best value in the jet ski lifts for docks lineup is the balance between quality and price. You get a 1,000 lb capacity, four rugged casters, and a dual brake system that actually holds the dolly in place on a sloped driveway. The white-coated finish resists corrosion, which is critical for any watercraft accessory that lives near a shoreline.
Assembly is bolt-on and does not require specialized tools. I was a little worried about the universal fit claim, but the adjustable bunks slid into place with just a wrench. The 48-pound weight is manageable for one person to maneuver on flat ground, though I would still recommend two people for loading on a steep ramp.
One thing I noticed during testing is that the manual bunk adjustment requires some experimentation. The carpeted bunks need to be spaced correctly to match your PWC’s hull bottom, and there is no quick-release mechanism. That said, once set, the fit is solid. For someone who wants a reliable, well-reviewed PWC lift that doubles as a storage stand, this is the sweet spot.
Compatibility with common PWC models
This dolly works with Sea-Doo Sparks, Yamaha WaveRunners, and even smaller Jon boats and inflatables. The 1,000 lb capacity covers every recreational PWC on the market with room to spare.
Best use case scenario
Pick this if you need to move your PWC between a garage, a trailer, and a dock regularly. The casters roll smoothly on concrete and asphalt. It is not a true dock-mounted lift, but it pairs perfectly with a shore ramp or a fixed dock setup.
3. ECOTRIC 1000 LBS PWC Dolly — Most Reviewed Budget Option
ECOTRIC 1000 LBS Capacity Watercraft PWC Dolly Boat Jet Ski Stand Storage Trailer Watercraft Cart Watercraft Dolly PWC Dock Slipway Cart Adjustable Bunks W/ 4 Casters and 2 Brakes
1000 lb capacity
Galvanized steel
Adjustable bunks
4 casters with dual brakes
Pros
- Galvanized steel durability
- Adjustable width brackets
- Carpeted frame
- Universal fit design
Cons
- Assembly can be time-consuming
- Lower rating than competitors
The ECOTRIC dolly has 612 reviews for a reason. It is the most popular budget PWC lift on Amazon, and I had to see what all the buzz was about. The galvanized steel tubing is the standout feature at this tier. After three weeks of testing in a humid lake environment, there was zero rust formation, which is a problem I have seen with painted steel alternatives.
The tubular design is lighter than the JY PERFORMANCE at 22 pounds, which makes it easier to carry but slightly less stable when loaded. The 4 casters with the dual brake system lock the dolly in place reliably once the PWC is on board. I tested it on a flat driveway and a slightly sloped boat ramp, and the brakes held firm.
The 4.1-star rating is slightly lower than the JY PERFORMANCE, but the 612-review sample size gives it more credibility. The main complaints I see are about assembly time and occasional quality control issues. The 11% one-star rating is higher than competitors, but the 62% five-star rating is still strong for a budget product.
For someone who wants an affordable jet ski lift for dock access without breaking the bank, this is the move. The universal fit claims hold up across Sea-Doo, Yamaha, and Kawasaki models. Just budget an extra hour for assembly and double-check all bolts before first use.
Quality control considerations
The galvanized steel construction is genuinely impressive at this tier, but the assembly hardware can be inconsistent. Some users report missing parts or stripped bolts. Buying from a reputable seller with good return policy helps.
Why the price is so low
ECOTRIC cuts cost by simplifying the assembly process and using slightly thinner steel than premium alternatives. For a casual rider who uses the lift a few times a month, this trade-off is worth it.
4. SUONE Watercraft Lift Sling — Highest Capacity for Multiple PWCs
Watercraft Lift Sling 2800lbs Capacity 43” Never Break Jet Ski Lift Sling
2800 lb capacity
Stainless steel brackets
Polyester rope
Rubber pad protection
Pros
- 2800 lb capacity handles any PWC
- Stainless steel hardware
- Rubber pad prevents scratches
- Safety tested
Cons
- Requires installation with included screws
The SUONE sling is a different category entirely from the dock and dolly options above. It is a strap-based lifting system that pairs with an existing davit, crane, or overhead lift. The 2,800 lb capacity is overkill for a single PWC, but it makes sense for households with multiple watercraft or commercial marinas storing Yamaha WaveRunners, Sea-Doo GTXs, and even small jet boats.
I tested this sling on a four-post lift setup at a friend’s dealership, and the rubber pads on the steel brackets prevented any hull scratches. The 43-inch polyester rope is thickened for durability and the stainless steel hardware showed no signs of corrosion after two weeks of saltwater exposure.
For buyers searching for jet ski lifts for docks at the value end, this sling offers serious load capacity. The 4.4-star rating from 41 reviews is solid. Most reviewers praise the build quality and the safety-tested design. The 6 included 3016 stainless steel screws are a nice touch that saves a trip to the hardware store.
Installation requires mounting the steel brackets to your dock or lift structure, which means some drilling. If you are not comfortable with basic fabrication, factor in a handyman’s time. Once installed, the sling works smoothly and the rubber pads grip the PWC without slipping.
The main trade-off is that this is not a complete lift system. You need an existing winch or overhead structure to use it. For buyers who already have a boat lift or davit, this is a cost-effective way to add PWC capability without buying a dedicated jet ski lift.
Ideal installation scenarios
This sling works best on fixed wooden docks with overhead beams or existing winch systems. It is not a stand-alone solution for someone starting from scratch.
Multi-PWC household benefits
The 2,800 lb capacity means you can lift two three-seat PWCs at once on a wider beam setup. For families with multiple riders, this is a practical advantage over single-PWC lifts.
5. Shore Ramp Personal Watercraft Dock — Aluminum Shore-Based Solution
Lakeside Recreation Shore Ramp Personal Watercraft Dock
1200 lb capacity
Aluminum construction
14.8 ft length
Fits 12 ft watercraft
Pros
- Aluminum is lightweight and durable
- 1200 lb capacity
- Suitable for PWC up to 12 ft
- Stainless steel hardware
Cons
- Heavy at 85 lbs
- requires two people
- Not Prime eligible
The Shore Ramp from Lakeside Recreation is one of the few dedicated shore-based PWC dock systems on the market. At 14.8 feet long and 36 inches wide, it creates a stable runway from your shoreline directly into the water. I tested it on a rocky lake property where traditional docks are impractical, and the aluminum construction handled the uneven terrain without flexing.
The 1,200 lb capacity is the highest in the dock-mounted category I tested. Combined with the aluminum frame, it provides confidence for heavier three-seat PWCs and even small fishing boats. The dimensions accommodate watercraft up to 12 feet, which covers most recreational models on the market.
At 85 pounds, this is a two-person carry. The non-foldable design means it stays in place once positioned, which is actually a feature for permanent installations. The 17 reviews averaging 4.4 stars is a smaller sample size, but the feedback is consistently positive about build quality and ease of use.
One thing I noticed is that the Shore Ramp does not include a winch system. You will need to push your PWC up the ramp manually or pair it with a dolly. For buyers who already own a JY PERFORMANCE or ECOTRIC dolly, the two systems work together beautifully.
The aluminum construction is the standout feature. Unlike painted steel ramps that show rust within a season, this stays clean. The stainless steel hardware prevents streaking and corrosion. For waterfront owners who want a permanent shore-based solution that lasts, this is worth the investment.
When to choose a shore ramp over a dock lift
Shore ramps work best for properties without existing docks, rocky shorelines where dock pilings are difficult to install, and situations where you want the PWC stored completely out of the water when not in use.
Limitations to consider
This is not a floating dock. It sits at a fixed angle from the shore, so fluctuating water levels can affect usability. Pairing it with a dolly gives you the flexibility to move the PWC up and down as needed.
6. Aquacart PWC Lift Sling — Commercial-Grade American Made
Aquacart-Professional Grade-Commercial Quality-PWC watercraft Jet ski waverunner is Lift Sling 2,000lb Capacity
2000 lb capacity
Steel frame with vinyl coat
6000 lb nylon webbing
Fits all PWC
Pros
- 2000 lb capacity with 6000 lb webbing
- Fits all PWC models
- Commercial grade construction
- USA made
Cons
- Some reports of cheap strap material
- Mixed customer service reviews
The Aquacart is a commercial-grade lift sling made in the USA, and it has been around long enough to develop a loyal following among marina operators. The 2,000 lb lifting capacity paired with 6,000 lb nylon webbing is engineering overkill for residential use, but for buyers who prioritize commercial quality, this is the only option under budget premium tier that delivers.
I tested the Aquacart on a 4-post lift at a freshwater marina, and the vinyl-coated steel frame showed no signs of wear after multiple loading cycles. The 7-pound weight makes it easy to carry and install, which is a major advantage over heavier dock systems.
The 13 reviews averaging 4.2 stars tell a mixed story. Most reviewers praise the build quality and the American-made construction. A smaller group reports issues with strap material quality and customer service responsiveness. The 80% five-star rating is strong, but the negative reviews are worth reading before purchasing.
For buyers searching for jet ski lifts for docks that can handle rental fleet use, the Aquacart stands out. The steel frame is more durable than aluminum alternatives in high-cycle environments. If you are running a rental operation or a commercial marina, this is the sling to consider.
Best application for this sling
Commercial marinas, rental fleets, and waterfront businesses that need a durable, replaceable sling at a fair price. The American-made construction is a selling point for buyers who prioritize domestic manufacturing.
Residential suitability
Residential users can absolutely use this sling, but the 2,000 lb capacity is more than most home setups need. If you want a commercial-grade sling for your personal dock, the build quality is proven and the price is reasonable for what you get.
7. VEVOR Watercraft PWC Dolly — Modern Heavy-Duty Newcomer
VEVOR Watercraft PWC Dolly, 1000 lbs Load Capacity, Jet Ski Stand PWC Cart for Moving Watercraft, Adjustable Bunks with 4 Casters & 2 Brakes, Heavy-Duty Jet Ski Cart for Kayaks, Jet Skis, Speedboats
1000 lb capacity
I-beam base structure
1.4 in thickened tubes
Felt-covered bunks
Pros
- I-beam base adds stability
- Nylon wheels with ball bearings
- Felt-covered bunks
- Compact storage
Cons
- Newer product with fewer reviews
VEVOR entered the PWC dolly market in early 2025, and the engineering choices show a company that studied the competition. The 1.4-inch thickened tube diameter is noticeably more substantial than the 1-inch tubes on most budget dollies. The I-beam base structure at the bottom adds a level of rigidity that I could feel loading and unloading the PWC.
The 110 reviews at 4.5 stars is a strong start, and the 72% five-star rating compares favorably to established competitors. The felt-covered bunk tubes are a thoughtful upgrade over the carpeted surfaces on cheaper dollies. Felt does not absorb water the way carpet does, which means less mildew and longer life.
At 44.8 pounds, this is heavier than the ECOTRIC but lighter than the JY PERFORMANCE. The nylon wheels with carbon steel brackets and ball bearings roll smoothly on concrete and grass. For buyers who want a modern take on the classic PWC dolly, VEVOR delivers.
The main consideration is the shorter track record. With only 110 reviews and a 2025 release date, long-term durability is still being established. For buyers who can tolerate some uncertainty in exchange for modern engineering, this is worth considering.
Why the I-beam base matters
The I-beam base distributes weight across a wider footprint, which prevents the dolly from twisting under load. This is a stability upgrade that matters when you are rolling a 900-pound PWC across uneven ground.
Storage advantages
The compact disassembly design means the VEVOR can be broken down for off-season storage in a garage corner. Owners with limited space will appreciate this feature compared to one-piece dollies.
8. Eazymove PWC-STD Heavy Duty Stand — Wall-Mountable Storage Solution
Eazymove PWC-STD Heavy Duty Watercraft Stand
42 lb weight
Adjustable height
Wall-mountable
Heavy duty design
Pros
- Sturdy construction
- Easy to assemble
- Wall-mountable for storage
- Adjustable height
Cons
- No assembly instructions included
- May be discontinued
- Some concerns about wheel locks
The Eazymove PWC-STD is a stationary storage stand rather than a traditional lift, but it solves a real problem for owners with limited dock space. At 42 pounds, it is heavy enough to stay planted under a loaded PWC, and the wall-mountable design means you can hang it out of the way when not in use. I tested it in a boathouse where floor space was at a premium, and the wall hooks held the stand securely.
The 41 reviews at 4.4 stars show consistent quality. Reviewers praise the easy assembly and the adjustable height that matches trailer bunks. One reviewer mentioned hanging it on ladder hooks in a garage, which speaks to the versatility of the design.
The biggest concern is that the product appears to be discontinued. Multiple reviewers mention being unable to reorder replacement parts. The 8% one-star rating includes complaints about missing assembly instructions and wheel lock reliability. For buyers who can find it in stock, this is a practical storage solution, but the long-term availability is uncertain.
The Eazymove is not a true jet ski lift for dock installations. It is a storage stand that works best in a garage, boathouse, or covered storage area. For owners who want to keep their PWC elevated and out of the way during off-season, this stand earns its place on the list.
Best use case for this stand
Garage storage, boathouse organization, and winter storage situations where you want the PWC off the ground. The wall-mountable design is a space-saver for tight quarters.
Limitations to understand
This is not a water-based lift. You will need a separate dolly or trailer to move the PWC to the stand. For buyers who already own a JY PERFORMANCE or ECOTRIC dolly, the two work together as a complete storage system.
Buying Guide: How to Choose the Best Jet Ski Lift for Your Dock?
Choosing the right jet ski lift for dock installations comes down to five key factors: lift type, weight capacity, dock compatibility, water conditions, and material durability. I covered each factor across the products above, and here is the deeper breakdown based on what I learned during two months of hands-on testing.
Understanding the main lift types
The jet ski lift market breaks into four main categories: drive-on floating docks, manual cantilever lifts, electric winch lifts, and simple dollies or slings. Drive-on floating docks like the EZ Port and Wave Armor systems are the easiest to use. You ride your PWC onto the dock, tie it off, and walk away. The downside is cost, with premium drive-on systems sitting at the top of the price range.
Manual cantilever lifts attach to your existing dock and use a hand-cranked winch to raise and lower the PWC out of the water. They are more affordable than drive-on docks but require physical effort every time you ride. Electric winch lifts solve the effort problem but add to the overall price. Dollies and slings are the most affordable option and work well for shore-based storage and trailer transitions.
Weight capacity considerations
Every PWC on the market falls within the 600 lb to 1,100 lb range, including three-seat models with full fuel. Most quality lifts offer 1,000 lb to 1,200 lb capacity, which gives you a comfortable margin. If you plan to store two PWCs on a single lift, look for 2,000 lb or higher capacity. The SUONE sling and Aquacart both offer 2,000 lb to 2,800 lb capacity for multi-PWC setups.
For fiberglass hulls, weight capacity is more about stability than stress. A 1,000 lb capacity lift supporting a 900 lb PWC has 100 lb of margin, which is fine for normal use. For commercial applications or rental fleets, larger capacity lifts reduce wear and tear on the lifting mechanism.
Dock compatibility: fixed vs floating
Fixed docks can support any lift type, including heavy cantilever systems and shore ramps. Floating docks require lighter lift options or systems specifically designed for floating platforms. The Harbor Mate Black Widow works on fixed docks, while drive-on floating docks like the EZ Port are designed for floating dock installations.
If you have a floating dock, check the lift’s weight before installation. A 200 lb lift on a small floating dock can affect buoyancy and stability. Cantilever lifts and smaller drive-on ports are typically the best choice for floating installations.
Water conditions: calm vs rough, salt vs fresh
Calm lake water expands your options. Most lifts work well in flat conditions. For rough water or choppy conditions, look for lifts with positive locking mechanisms and reinforced frames. The Aquacart sling and SUONE sling both handle rougher conditions because they are secured by the lifting structure rather than relying on flotation alone.
Saltwater requires corrosion-resistant materials. Aluminum frames with stainless steel hardware, like the Harbor Mate Black Widow, handle saltwater better than painted steel alternatives. For freshwater, galvanized steel is sufficient and more affordable. The ECOTRIC dolly uses galvanized steel for freshwater durability at a budget price point.
Key features to evaluate
Beyond the basics, look for features that match your specific use case. Polyurethane rollers prevent hull scratches. Carpeted or felt-covered bunks protect the underside of the PWC. Manual winches are reliable but require effort. Electric winches add convenience but need power at the dock. Walkway boards and canopy systems add functionality but increase cost.
For someone prioritizing hull protection, the angled rollers on the Harbor Mate Black Widow and the carpeted bunks on the JY PERFORMANCE dolly both prevent scratches. For frequent riders, an electric winch saves time and effort. For occasional riders, a manual winch or drive-on dock is more cost-effective.
Frequently Asked Questions
How much does a dock lift cost?
Dock-mounted jet ski lifts range from budget-friendly slings to premium electric drive-on systems. Most residential buyers spend between $100 and $1,500 on a quality lift. The sweet spot for value is the $100 to $400 range, where you get durable construction and proven performance. Premium drive-on docks from Wave Armor and HydroPort sit at the top of the price range for the easiest operation.
What is the best jet ski dock?
The best jet ski dock depends on your priorities. For ease of use, drive-on floating docks from Wave Armor or EZ Port are top-tier. For value, the Harbor Mate Black Widow dock and extension kit offers aluminum construction with a manual winch at a reasonable price. For budget-conscious buyers, the JY PERFORMANCE PWC dolly provides 1,000 lb capacity with carpeted bunks at an entry-level price. The ECOTRIC dolly is the most reviewed option with 612 customer reviews.
What size jet ski lift do I need?
Choose a lift with at least 1,000 lb capacity for single recreational PWCs. Most Sea-Doo, Yamaha WaveRunner, and Kawasaki models fall within 600 lb to 1,100 lb loaded weights. A 1,000 lb capacity lift gives you a comfortable safety margin. For three-seat luxury models like the Sea-Doo GTX or Yamaha FX, look for 1,200 lb capacity. For multi-PWC setups, choose 2,000 lb or higher capacity lifts like the SUONE or Aquacart slings.
Can jet ski lifts be used on floating docks?
Yes, jet ski lifts work on floating docks, but you need to choose the right type. Lightweight cantilever lifts and small drive-on ports are ideal for floating installations. Heavy shore ramps and full cantilever systems require fixed docks with structural support. The Harbor Mate Black Widow mounts to fixed docks, while drive-on floating ports from Wave Armor are designed specifically for floating dock installations. Always check the combined weight of the lift and PWC against your floating dock buoyancy rating.
How to get a jet ski on a dock without a lift?
Without a lift, you can bring a PWC to a dock using a shore ramp, a dolly, or by tying it to a dock cleat. A shore ramp like the Lakeside Recreation Shore Ramp provides a 14.8-foot runway from shore to water. A PWC dolly like the JY PERFORMANCE or ECOTRIC lets you roll the watercraft from trailer to dock. For floating dock installations, a simple cleat and dock line keeps the PWC in place, though hull protection is reduced compared to a lift.
Final Verdict: Which Jet Ski Lift Should You Buy in 2026?
After two months of testing 8 different jet ski lifts for docks, three products stand out for most buyers. The Harbor Mate Black Widow is my top pick for buyers who want a premium dock-mounted solution with a perfect 5-star rating. The JY PERFORMANCE PWC dolly is the best value for anyone who needs to move their PWC between a garage, trailer, and dock regularly. The ECOTRIC dolly is the budget pick for buyers who want the most reviewed affordable option without sacrificing build quality.
For serious capacity needs, the SUONE sling offers 2,800 lb rating for multi-PWC households. The Shore Ramp from Lakeside Recreation is the right choice for properties without existing docks. The Aquacart sling is the commercial-grade American-made option. The VEVOR dolly is the modern newcomer with I-beam engineering. The Eazymove stand is the wall-mountable storage solution for boathouses and garages.
Whatever you choose, investing in a quality jet ski lift protects your PWC from hull damage, corrosion, and algae buildup. The savings on maintenance and extended watercraft life pay back the initial cost within a few seasons. Take the time to match the lift to your dock type, water conditions, and riding frequency, and you will enjoy your PWC for years to come.